5083 Aluminum Sheet for Yachts

One of the most important goals in the manufacture of the yachts is to achieve the design speed. In order to achieve the above goals, under the same hull line shape and the same main engine power, the lighter the weight of the ship, the faster the ship’s speed and the lower the fuel consumption. The density of aluminum alloy is only 1/3 of that of steel, which can greatly reduce the ship’s weight.

5083 marine aluminum plate is a typical Al-Mg 5xxx aluminium alloy sheet. Because of its high strength, strong stress resistance and corrosion resistance, it can adapt to the marine environment. At the same time, the aluminum material has the characteristics of low density and good weldability all these makes 5083 enjoy a promising prospect in shipbuilding industry.

5083 aluminium alloy like 5083 h32 offers the highest strength of all non-heat-treatable aluminum alloys and is used by many military and commercial vessels. The entire hull structure of many yachts, including the keel and support frame, is fabricated from marine-grade 5083 alloy.

In the case of the same thickness and other conditions, a ship made of 5083 aluminum alloy as the main material can withstand greater pressure than a ship made of glass fiber, steel plate, or 5052 aluminum alloy when it is hit, so as not to cause crack or deformation.In the ship design industry, the 5083 ultra-wide aluminum plate with the tempers like 5083H116/H321/H112 is mostly used. It is used in the main deck of the ship, the diesel engine pedestal, the side of the ship, and the outer side of the ship. The bending effect of 5083 aluminum plate depends on the state. The states suitable for bending are H24, H32, h34, etc.

As a marine aluminum plate manufacturers, Haomei Aluminum has rich alloys including 5052, 5083, 5086, 1561,etc. For 5083 aluminum plate, we offer rich tempers like 5083h22, 5083 h116, 5083 h112,etc. Welcome to leave message below to inquire what you need.